HP D9143-69004 - I/O baseboard - Has internal and external SCSI connectors and a slot for the I/O board Retail
HP D9143-63006 - Olx board assembly - Manages power to the `hot swap` PCI slots - Has LED indicator lights and I/O board retaining brackets Retail
HP D9143-63007 - Control panel assembly with cable - Includes LCD display, power button, reset button, keyboard lock, and status LED`s Retail
HP P1810-63036 - Ultra3 SCSI cable with twisted pair segments - Has two 68-pin (M) connectors - 51.7cm (20.4in) long Retail
HP D3353-69001 - Processor board with a single socket for a 75MHz Pentium processor plus six SIMM sockets - Processor Board (with a Single Socket for a 75MHz Pentium Processor IC Plus Six SIMM Sockets) - Plugs into the System (Mother) Board Retail
HP 1205-0826 - Heat sink - With spring clip - For pin grid array type processor IC - Black, 1.90in x 1.885in and 0.65in high Retail
HP D3310-60003 - Self paced training kit for NetServer LC family - Includes service manual, NTSC format video (VHS), and one test Retail
HP 5010-8878 - Server saver test disk - Runs tests on system board, processor board, IDE hard drives, memory subsystem, SCSI controllers and busses, and SCSI hard drives Retail
HP 3160-0860 - Tubeaxial fan (NMB Technologies 3610KL-04W-B47-PS2) - 92mm x 92mm x 25mm thick, 12VDC, 2,850 RPM, 49CFM - Includes cable assembly - Mounts in the center of the chassis rear panel Retail
HP 0960-0899 - 256kB, 33MHz secondary cache memory module upgrade - (D3322A) - Plugs in a socket on the processor board Retail
HP 0960-0888 - Active Single-Ended SCSI terminator with 50-pin (M) connector - Attaches to an internal SCSI drive cable Retail
HP 1150-1921 - EISA Single-Ended SCSI-2 host adapter - EISA Single-Ended SCSI-2 Host Adapter (D1681A or D2649A) Retail
HP 5182-0081 - Fast SCSI ribbon cable - Cable marked `Internal SCSI cable (LC) (Fast SCSI)` - Six 50-pin (F) connectors - 64.8cm (25.5in) long Retail
HP 5182-0080 - IDE hard drive ribbon cable marked `IDE hard disk cable (LC)` - 40-pin (F) connector marked `System board` to a 40-pin (F) connector marked `Primary IDE disk drive` and a 40-pin (F) connector marked `Secondary IDE hard disk` - 46.2cm ( Retail
HP 5182-0079 - Floppy drive ribbon cable assembly - A 34 pin (F) connector marked `To System Board` to a 34 pin (F) edge connector and a 34 pin (F) connector marked `To 3.5 inch Flexible Disk Drive` - 41.3cm (16.3 inches) long Retail
HP 1205-0902 - Clip-on heat sink - For the new style processor IC (old style was glued to the IC) Retail
HP 5064-0744 - Chassis assembly - Includes left side cover (Door) , fan, and mass storage cage Retail
HP D5028-69009 - Processor slot termination board - Installs in unused processor board slot (One required for each processor board slot that is unused) Retail
HP D5028-69007 - System processor board mounted on tray - Has four processor board slots and eight PCI slots Retail
HP D5972A - Disk array controller kit - SCSI adapter to connect internal channel of disk array controllers to outside of server - Cables are attached for up to six disk array controllers Retail
HP D5028-69005 - SCSI extender board - Has six external Ultra SCSI ports - Includes power control board Retail
