HP 5182-6733 - SCSI ribbon cable (C7) - Cable marked `Narrow SCSI channel B cable` - 50-pin (F) internal connector to high density 50-pin (F) connector with latch clips for the rear panel - 55cm (21.7in) long - Cable C7 - From system board SCSI `B` p Retail
HP D3588-60001 - NetServer LH cable kit - For adding drives or reconfiguring the system - Includes internal (C2) and backplane (C4) fast wide cables, and CD-ROM (C6) and external (C7) narrow cables Retail
HP C2260-60078 - Drive mounting tray (Dove Gray) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, front bezel, and status cable with LED - Hard drive mounting tray (Dove Gray) (P/O D2198A) - For mounting 3.5 inch dr Retail
HP 5063-8389 - 5.25-inch filler panel (Quartz Gray) - For empty 5.25-inch drive bays above the Hot-Swap drive bay Retail
HP 5064-7985 - SCSI-2 CD-ROM drive (Flint Gray) - 32X CD-ROM read - Has loading tray - Replacement for the 4X CD-ROM (Model D2992B) and 12X CD-ROM drives Retail
HP 5182-4570 - Ribbon cable for one IDE hard disk drive - Cable marked `IDE hard disk cable` - 40-pin (F) connector to 40-pin (F) connector - 40.9cm (16.1in) long Retail
HP 5182-4552 - SCSI ribbon cable (C5) - Cable is marked `Narrow SCSI array cable` - 50-pin (F) connector to 50-pin (F) connector marked `to disk array` - 59cm (23.2in) long - From hot-swap backplane board to SCSI `A` or `B` port on the system (mother Retail
HP 5182-4535 - Ribbon cable assembly - 3-pin (F) connector to 3-pin (F) connector - 30cm (11.8in) long - I2C bus cable assembly - From hot-swap backplane boards to system (mother) board (two used) Retail
HP 5182-4523 - Fast Wide internal SCSI cable - 68-pin (M) to 68-pin (M) - 23cm (9in) long - Cable C4 - Between the two hot-swap backplane boards (configuration dependent) Retail
HP 5182-4522 - SCSI ribbon cable with termination - Cable is marked `Array SCSI cable (Narrow)` - One 50-pin (F) connector marked `To array back plane` and two 50-pin (F) connectors marked `To unterminated SCSI device` - 34.3cm (13.5in) long - From C Retail
HP 5182-4521 - Fast Wide SCSI ribbon cable (C2) - Cable marked `Int. SCSI cable C2-80 ohm` - 68-pin (M) connector marked `System board or PCI board` to 68-pin (M) connector marked `SCSI mass storage device` - 59.9cm (23.6in) long - From hot-swap back Retail
HP 5182-0015 - Floppy drive ribbon cable marked `Flexible disk cable` - 34-pin (F) connector marked `to system board` to a 34-pin (F) old-style edge connector and a 34-pin (F) new-style connector marked `to 3.5 inch flexible disk drive` - 61.5cm (24. Retail
HP 5063-5673 - `Hot swap` bezel assembly - Frame around six `hot swap` drives - Includes the hot swap drive retainer lock Retail
HP 5063-5697 - EISA slot card guide - Mounts to the chassis assembly (Over the front panel fans) Retail
HP 5041-1082 - Rubber foot - Replacement rubber foot for the bottom of the computer (two used) Retail
HP 5063-0381 - Bezel assembly - Plastic cover over the control panel PC board has cut outs for switches and LED activity lights Retail
HP J4144-69101 - ProCurve 9300 Gigabit-SX management module - Provides eight ports of Gigabit-SX connectivity for the ProCurve Routing Switch mainframe 9304M/9308M - (part of J4144A) Retail
HP 8120-6884 - Daisy chain` power cord (Black) - 15 AWG, 2.5m (8.2ft) long - Has (M) C20 plug for power input, and (F) C19 receptacle for power output - For rack mount applications Retail
HP A5220-67003 - Narrow Single-Ended SCSI-2 slot load DVD-ROM drive - 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) - Has headphone jack and volume control Retail
