HP D4966A - NetServer LX/LXr Dual 6/200 upgrade kit - Includes processor board and two Pentium Pro 200MHz processors with 1MB cache per processor - Requires a 2nd power supply module - All processors Must be identical Retail
HP D6129-90016 - Self-paced training kit for HP NetServer LPr - Includes video, workbook, and certification test Retail
HP D6130-80200 - Technical reference card - Includes: mass storage cabling, service information, system board diagram, and rear panel and control panel diagrams Retail
HP 5183-6820 - Ultra2 Wide SCSI ribbon cable (C18) - Cable marked `Int/Ext SCSI cable` - Has a 68-pin (M) connector marked `to SF-2 board`, a 68-pin (M) connector marked `to rizer board`, and a 68-pin (M) connector marked `to external SCSI port` - 68 Retail
HP 5183-6818 - Ribbon cable marked `Control panel` - 20-pin (F) connector to 20-pin (F) connector - 36cm (14.2in) long Retail
HP D6130-60004 - Rack mount kit for LPr NetServer - Includes rack mount rails - Rails mount on side of chassis Retail
HP 1821-3452 - Intel Pentium Pro processor - 200MHz (P6, 512KB Level-2 cache) - Does not include heat sink - (Part of D4867A) Retail
HP D4840-80214 - Flash ROM (Revision 4.05.11.PS) - Mounts in socket on the system (Mother) board Retail
HP J1454A - External mass storage rack mount kit - D3604A/B Storage System/6 rack mount kit - Mount one or two systems side by side - Has two sliding shelves, solid base, and bezel - (Parchment White) Retail
HP J1491A - NetServer LD/LH/LS series rack mount kit - Includes rails, solid base, front bezel, and cable management brackets - Quartz Gray Retail
HP D5017-69001 - Processor board - Has two Pentium II processor sockets, two VRM sockets, and four DIMM sockets - Processor Board - Has Two Pentium II Processor IC Sockets, Two VRM Sockets, and Four DIMM Sockets Retail
HP D4840-68002 - Power management board - Interfaces the power supply(s) to the rest of the computer - Includes power supply input and power output connectors - Power Management Board - Interfaces the Power Supply (or the Two Power Supplies) to the R Retail
HP 5182-6800 - Power supply cable assembly - 18-pin (F) connector marked `BP1` to five cable bundles with an unmarked 4-pin (F) connector and 4-pin (F) connectors marked `P16`, `P17`, `P18`, `P19`, `P20`, `P21`, `P22`, and `P23` - The longest cable i Retail
HP 5182-6799 - Power supply cable assembly - 18-pin (F) connector marked `BP1` to both a 12.1cm (4.8in) cable with a 3-pin (F) connector marked `P27` and a 21.6cm (8.5in) cable with an 18-pin (F) connector marked `P16` - Power supply cable for system Retail
HP 5182-6798 - Cable assembly - 24-pin (F) connector to four 6-pin (F) connectors marked `P1`, `P2`, `P3`, and `P4` - Each cable assembly is 20cm (7.9in) long - Power supply cable for system board Retail
HP 5064-3523 - EISA/PCI slot card guide - Mounts to the chassis assembly (Over the front panel fans) Retail
HP 5042-2184 - Airflow guide - Plastic cover for the processor cage - Directs air to heat sink Retail
HP D7092-69000 - I/O board - Contains ISA and PCI accessory slots - I/O Board - Contains ISA and PCI Accessory Slots - One of the Large Boards in Center of Chassis Retail
HP D6969-63001 - Memory board - Has eight slots for DIMMs - DIMMs must be installed in pairs - Memory Board - Has Eight Slots for DIMMs - DIMMs Must be Installed in Pairs - Located on the System Processor Board Assembly, Two Memory Boards are Require Retail
HP 5064-7082 - Nameplate - NetServer LH4 series logo (pedestal mount) - Mounts on the front bezel Retail
HP J1513B - Tie kit for Rack System/E33 or U33 - Used to attach two E33 or U33 cabinets together Retail
HP J1492A - External mass storage rack mount kit (Quartz Gray) - Mount one or two systems side by side - Has two sliding shelves, solid base, and bezel - (D3604A/B) Retail
HP E7804A - PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 4.0m (13.1ft) long - 240V, 16A Retail
HP 8120-6961 - Daisy chain` power cord (Black) - 14 AWG, 4.0m (13.1ft) long - Has (M) C20 plug for power input, and (F) C19 plug for power output - (E7804A) Retail
HP E7798A - PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 2.5m (8.2ft) long - 240V, 16A Retail
HP E7807A - PDU power cord - Has (M) C14 plug for power input and (F) C15 plug that has a `U` shaped channel above the ground pin (For preventing use of a lower rated power cord) for power output - 0.76m (2.5ft) long Retail
HP 8120-1625M - Daisy chain` power cord (Black) - 18 AWG, 2.5m (8.2ft) long - Has (M) C14 plug for power input and (F) C13 plug for power output - (E7742A) Retail
HP D7112A - LH3 to LH4 system upgrade - Includes two 500 MHz Pentium III Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules Retail
HP D7102A - LH3 to LH4 system upgrade - Includes two 400 MHz Pentium II Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules Retail
HP D6114-69001 - 256MB, 50nS EDO DIMM memory module - Part number is for one of four modules that come in the memory upgrade kit (part of D6114A) Retail
HP D6112-69001 - 64MB, 50nS EDO DIMM memory module - Part number is for one of four modules that come in the memory upgrade kit (part of D6112A) Retail
HP 5067-4214 - Front panel assembly - Includes power button, reset button, keyboard lock, LCD display, status LED`s Retail
