HP C6287-67911 - Rack mount kit - Used to mount one or two DLT 418/718/818 autoloaders in non-HP 19-inch racks - Includes shelf, bezel, filler panel, and hardware - (C6287F) Retail
HP C6287-67901 - Rack mount kit - Used to mount one or two DLT 418/718/818 autoloaders in HP 19-inch racks - Includes shelf, bezel, filler panel, and hardware - (C6287J) Retail
HP 5183-2408 - Ultra Wide Single-Ended SCSI terminator - Has 68-pin high density (M) connector with thumbscrews Retail
HP C5677-69201 - SureStore DAT24X6i DDS-3 internal autoloader tape drive - Tape magazine can hold up to five 24GB DDS-3 data cartridges and one DDS cleaning cartridge Retail
HP C5644-61000 - Single-Ended SCSI-2 internal ribbon cable with termination - Has four 50-pin connectors - 1m (3.3ft) long Retail
HP 5064-4688 - Adapter - 68-pin high density (F) to 50-pin (F) - Used to connect 68-pin (M) ribbon cable to 50-pin (M) Narrow SCSI device - (C5710A) Retail
HP 8120-6331 - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland) Retail
HP 8120-6330 - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark) Retail
HP 1252-3251 - Single-ended SCSI passive terminator - Has 50 pin low density (M) connector with bail locks Retail
HP 1252-2297 - Single-Ended SCSI passive terminator - Has 50-pin low density (M) connector with bail locks Retail
HP 5063-1218 - SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 2.5m (8.2ft) long Retail
HP K2297-60001M - Single-Ended SCSI-2 interface cable - 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock - 1.5m (4.9ft) long - (K2297) Retail
HP 5012-8324 - Single-Ended SCSI-2 interface cable - 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock - 1.0m (3.3ft) long Retail
HP 5063-1269 - SCSI interface cable - 50-pin low density (M) bail lock to 68-pin high density (M) thumbscrew - 2.0m (6.6ft) long - (A3401A Option 002) Retail
HP 5063-1214 - SCSI interface cable - 50-pin low density (M) bail lock to 68-pin high density (M) thumbscrew - 1.0m (3.3ft) long - (C2915A) Retail
HP C7149-69050 - Tape shuttle (autoloader) assembly - For Low Voltage Differential SCSI - Includes Remote Management Card (RMC) - Does not include drive or front magazine Retail
HP C7766C - Ultrium Low Voltage Differential (LVD) SCSI connectivity kit - Includes LVDS PCI host bus adapter card, five Ultrium data cartridges with 100GB native capacity each (200GB with 2:1 data compression), one Ultrium cleaning cartridge, and an Retail
HP C7766A - Ultrium 1/9 HVDS connectivity kit - Includes HVDS PCI host bus adapter card, 5 data cartridges with 100GB native capacity each (200GB with 2:1 data compression), 1 cleaning cartridge, and an ESD wrist strap Retail
HP C6282-82700 - PCI Ultra Wide High Voltage Differential SCSI (HVDS) host bus adapter (Adaptec AHA-2944UW) - (P/O C7738RA) Retail
HP C7768A - HP Ultrium 1/9 HVDS conversion kit - Includes HVDS Ultrium drive, removable 6 slot Ultrium front magazine, Ultrium data cartridge with 100GB native capacity, and cleaning tape - Converts a DLT 1 or DLT 8000 HVDS 1/9 Autoloader to Ultrium Retail
HP C7145-60095 - Rack mount kit (Parchment White) - Includes sliding rails, tray, filler panel, and mounting hardware Retail
HP C7145-61601 - SCSI interconnect cable with thumbscrews on both ends - Has high density 68-pin (M) connectors - 26.5cm (10.4-in) long - SCSI jumper cable - Between drive Module and Autoloader Retail
HP C7768C - Ultrium 1/9 LVDS conversion kit - Includes LVDS Ultrium drive, removable 6 slot Ultrium front magazine, Ultrium data cartridge with 100GB native capacity, and cleaning tape - Converts a DLT 1 or DLT 8000 LVDS 1/9 Autoloader to Ultrium Retail
HP C9244AR - DLT 1 or VS80 LVDS connectivity kit - Includes LVDS PCI host bus adapter card, five DLT 1 data cartridges with 40GB native capacity each (80GB with 2:1 data compression), one DLT 1 cleaning cartridge, and an ESD wrist strap Retail
HP C9244A - DLT 1 or VS80 LVDS connectivity kit - Includes LVDS PCI host bus adapter card, five DLT 1 data cartridges with 40GB native capacity each (80GB with 2:1 data compression), one DLT 1 cleaning cartridge, and an ESD wrist strap Retail
HP C5732A - Rail kit for mounting internal tape drives in Power Edge 2300, 4100, 4200, 6100, and 6300 servers Retail
HP C7436A - DDS-4 (DAT) autoloader magazine pre-loaded with five 150m DDS-4 data tapes and one cleaning tape Retail
HP C1571-60010 - Empty DDS (DAT) autoloader magazine - Holds five data tapes and one cleaning tape Retail
HP 1252-5634 - Single-ended SCSI active terminator - Has 50 pin low density (M) connector with bail locks Retail
HP 1252-3920 - Single-Ended SCSI active terminator - Has 50-pin low density connector (M) with bail locks - (K2291) Retail
HP K2285-60001 - SCSI interface cable - 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip - 1.5m (4.9ft) long - (K2285) Retail
HP K2286-60001 - SCSI interface cable - 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip - 1.0m (3.3ft) long - (K2286) Retail
