HP C1107-60082 - Front panel - Two are used - Covers the upper left front area or the lower right front area - Flint gray Retail
HP C1107-60039 - Encoder strip mount - Two used - One at the top and bottom of the cabinet - Vertical encoder strip attaches to these Retail
HP 1390-1041 - Latch - Mates with a strike - Latch - Two are used - Mounted on the chassis - Mates with a strike on the lower right side panel Retail
HP C1107-60071 - Internal SCSI ribbon cable - Has 50-pin low density (F) connectors with bail locks on both ends and a 50-pin (F) drive connector in the middle - 15.8cm (6.3 inches) long Retail
HP C1107-60070 - Drive power cable assembly - Has a 4-pin (F) connector on one end and both a 4-pin (F) and an 8-pin (F) connector on the other end - 1.5m (4.9ft) long Retail
HP C1154J - 2 drive upgrade kit for models 660ex (C1104J) and 1200ex (C1111J) - Upgrades from a 4 drive unit to a 6 drive unit - Includes two 5.2GB 8X optical drives, cables, and hardware for installation Retail
HP C1160-69128 - Power supply assembly - 5V/12VDC, 200 watts - Has four cables connecting on top Retail
HP C1160-60108 - Single-ended/differential SCSI repeater/converter board - Single Ended/Differential SCSI Repeater/Converter Board - Mounts to Internal Panel on Left Side of the Cabinet (Under an RFI Shield) Retail
HP C1160-69101 - Full capacity autochanger controller board - (Full Capacity) Autochanger Controller Board - Under RFI Shield in Bottom of Cabinet Retail
HP C1160-60059 - Internal SCSI ribbon cable - From optical drives to controller board and SCSI interface board Retail
HP C1100-60126 - Eight disk magazine side (guide) kit - Includes one right side and one left side - Forms the top 64 of the 76 internal disk storage slots (eight pairs used) Retail
HP C1160-60041 - Picker assembly umbilical ribbon cable - From picker assembly to controller board Retail
HP C1700-69308 - Autochanger controller board - Autochanger Controller Bd - Mounts on Side of Power Supply Retail
HP C1708-60110 - Differential SCSI to Single-Ended SCSI converter board - Converts Differential SCSI interface to Single-Ended SCSI - Differential SCSI to Single Ended SCSI Converter Board (For Option 002 Optical Disk Systems) - Converts Differential Retail
HP C1708-60150 - Internal Differential SCSI cable - From Differential SCSI converter board to autochanger controller board and optical drive - For Option 002 optical disk systems Retail
HP C1708-60049 - Differential SCSI loop cable - Has two rear panel connectors and one internal connector - From rear panel to Differential SCSI converter board and back to rear panel - For Option 002 optical disk systems Retail
HP C1708-60028 - Power supply assembly - Includes power switch and power receptacle - Mounts on rear panel Retail
HP C1708-69203 - Autochanger controller board - Autochanger Controller Board - Large Board on Right Side of Optical Disk System Retail
