HP D5028-69009 - Processor slot termination board - Installs in unused processor board slot (One required for each processor board slot that is unused) Retail
HP D5028-69007 - System processor board mounted on tray - Has four processor board slots and eight PCI slots Retail
HP D5972A - Disk array controller kit - SCSI adapter to connect internal channel of disk array controllers to outside of server - Cables are attached for up to six disk array controllers Retail
HP D5028-69005 - SCSI extender board - Has six external Ultra SCSI ports - Includes power control board Retail
HP D5028-69017 - Satellite chassis assembly - Includes slide halves, PIN board, mid-plane board, DC harness and peripheral interconnect board, data cables, and power cables Retail
HP D6021-69001 - Mid-plane PC board - Board that connects the I/O board, memory boards, and the processor baseboard - Mid-Plane PC Board - Board That Connects the I/O Board, Memory Boards, and the Processor Baseboard - Mounts Vertically in the Center Retail
HP D6021-63039 - Peripheral bay interconnect board - Peripheral Bay Interconnect Board - Mounts Behind the Peripheral Bay on the Bottom Left Side of the Chassis Retail
HP D6021-60002 - Front panel control board (PCA) with LCD display assembly - Front Panel Control Board with LCD Display Assembly Retail
HP 5183-6881 - SCSI ribbon cable kit (C15) - Includes a 68-pin (F) to 50-pin (F) adapter and a terminated cable marked `PCI board to MS Cage C15-90 ohm` - 68-pin (M) connector to 68-pin (M) connector - 21.3cm (8.4in) long - For SCSI DDS (DAT) tape dr Retail
HP 5183-6873 - Ultra2 LVD SCSI ribbon cable - 68-pin (M) connector marked `P2` to very high density 68-pin (F) connector marked `P1` with thumbscrews for connecting to external storage systems - 25.7cm (10.1in) long Retail
HP D7131A - SCSI interface cable - Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector - 1.0m (3.3ft) long Retail
HP 5064-6140 - Rack mount kit for LXr8000 NetServer - Includes rack mount rails - Rails mount on side of chassis Retail
HP D6021-63044 - Processor ejector handles - To remove processor from processor baseboard - Mounts on processor Retail
HP D6021-63043 - Front bezel kit - Comes with the LXr 8000 front bezel, hinge, latch, and hardware Retail
HP D4898-63004 - Power interconnect board - Power Interconnect Board - Mounts Behind the Power Supplies Retail
HP D4311-69008 - Processor board - Can hold up to two Pentium Pro 200MHz processors with 1MB cache - Processor Board - Can Hold up to Two Pentium Pro 200MHz Processors with 1MB Cache - Mounts on the System Processor Board - up to Two Processor Boards Retail
HP D4311-69007 - System processor board - Supports up to four processors on two processor boards - With integrated Super VGA video controller Retail
HP D4311-69002 - Processor board - Can hold up to two Pentium pro 166MHz or 200MHz processors with 512KB cache - Processor Board - Can Hold up to Two Pentium Pro 166MHz or 200MHz Processors with 512KB Cache - Mounts on the System Processor Board - up Retail
HP D4898-69001 - Fan module assembly - Has two large cooling fans for the processor boards and five smaller fans for chassis cooling mounted on a flat panel - Mounts in the middle of the Chassis assembly Retail
HP D4898-69024 - Power monitor controller board - Monitors the power output from the hot-swap power supplies Retail
HP D4898-63014 - DC power distribution cable - From the power interconnect board to the system processor board Retail
HP 5183-2488 - SCSI ribbon cable with termination - Cable is marked `Int SCSI cable 90 ohm` - Has one 68-pin (M) connector marked `To system board` and three 68-pin (M) connectors marked `To unterminated SCSI device` - 1.9m (6.3ft) long Retail
