HP 0957-0038 - Power supply (ACDC Electronics TN99220) Front End - AC input - 300VDC output @ 10A, and 220VAC output at 2.6A Retail
HP 0950-1947 - DC-DC converter module (Yokogawa PS502-0101) - 270-330VDC input - Three DC outputs (+12V, -12V, -2V) Retail
HP 0950-1945 - Battery back-up module (Yokogawa PS503-0101) - 270-330VDC input - 28.8VDC output, 15A (charger) - 4.9VDC output, 30A (off-battery) - Note: Power supply MUST be the same manufacturer Retail
HP 0950-1657 - Battery charger (back-up) module (made by ITT) - 270-330VDC input - Note: Power supply MUST be of the same manufacturer Retail
HP 0950-1949 - DC to DC converter module (Yokogawa PS500-0101) - 270-330VDC input - 5.1VDC output, 100A - +5.1V DC to DC Converter Module (270V to 330V DC Input) Retail
HP 30190-69001 - Processor board (with standard floating point coprocessor) - Plugs into the processor card cage - Processor Board - Plugs into the Processor Card Cage - for HP Repair Use ONLY Retail
HP A1112-69004 - Processor dependant hardware (PDH) board - Processor Dependant Hardware (PDH) Board - Plugs into the Processor Card Cage Retail
HP 30191-69007 - CIO channel adapter - Activates CIO slots - CIO Channel Adapter - in I/O Card Cage - Activates CIO Slots Retail
HP 30190-69051 - Power system monitor (PSM) board - Power System Monitor (PSM) Board - in Processor Card Cage Retail
HP 30190-69049 - Processor dependant hardware (PDH) board - Plugs into the processor card cage Retail
HP 2110-0303M - Fuse - 2A, 250V max - .25in dia. x 1.25in long, glass body - Fuse - 2A, 250V - For power supply fans - Two used Retail
HP 3160-0362 - Tubeaxial fan (Nidec Corp. A30322-10) - 162mm (6.375in) mounting hole spacing, 50.8mm (2.0in) thick, 230VAC, 50-60Hz, 240CFM - Mounts in the plenums in both bays Retail
HP 30190-60087 - Ribbon cable - 40-pin (F) connector to 40-pin (F) connector - 1.7m (5.5ft) long - To control panel - On top of power bay Retail
HP 30190-60064 - Cable assembly - 60-pin (F) connector to two 18-pin (F) connectors and three 20-pin (F) connectors - Overall length is 1.1m (3.6ft) - Battery charger control - From AC power supply Retail
HP 30190-60031 - Battery backup cable assembly - Eight ring terminals to eight ring terminals - Overall length is 1.3m (4.5ft) - From battery charger to processor bay Retail
HP 30190-60026 - Cable assembly - Four flanged fork terminals to four flanged fork terminals - The cable consists of a 96cm (38in) wire, a 107cm (42in) wire, and two 142cm (56in) wires - From power switch to power transformer Retail
HP 30190-60025 - Cable assembly - Four flanged fork terminals to three stripped pig tails and a flanged fork terminal - 1.3m (4.3ft) long - From AC input unit to power switch Retail
HP 1420-0353 - 3.0V battery - 1.4Ah lithium cell - Type CR12600SE or equivalent - Not rechargeable - For newer PDH board or processor board (two used) Retail
