HP A3639-63016 - `V` SCSI interface cable - 68-pin very high density (M) connector with inline termination on one end, 68-pin very high density (M) connector in the middle, 68-pin high density (M) on the other end - Two 2.0m (6.6ft) sections - (A5608 Retail
HP A6093-60006 - PCI card OLR assembly - latch assembly that activates the PCI slots and secures the PCI cards Retail
HP A5841-69001 - 512MB ECC high-density SDRAM DIMM memory module - Must be installed in pairs of equal size (1024MB kit is A5841A) Retail
HP J8133-69001 - ProCurve wireless access point 520wl high performance bridge - Has two access point card slots, an RJ-45 10 Base-T/100 Base-TX connector, and a DB-9 RS-232C console port connector - Includes processor module, power supply, wall mount Retail
HP J8131-69101 - ProCurve wireless access point NA - Selectable channels one through fourteen (2.412GHz to 2.484GHz) - Has one RJ-45 10/100 Base-TX port, one 9-pin RS-232C console port, and a DC power connector - For World Wide except North America - Retail
HP J8130-69201 - HP ProCurve Wireless Access Point 420 (North America) - Has one 10/100Base-TX RJ-45 port Retail
HP 8121-0736 - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 100VAC in Japan) Retail
HP 8121-0730 - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 240V in Australia) Retail
HP 5092-0723 - Antenna assembly - Positionable antenna with SMA connector, power gain is 2.5dBi Retail
HP 2701A00H - 2.5dBi (2.4GHz) and 4.5dBi (5.0GHz) indoor dual band omni-directional 6-element antenna - For use in 2.4GHz and 5.0GHz 802.11a/b/g/n Multiple-Input Multiple-Output (MIMO) applications - Mounts to the ceiling Retail
HP 9801A0AA - WA2620 dual radio 802.11n access point - Supports 802.11n/a/b/g/n on both radios - Indoor design with six built-in dual band antennas, three RP-SMA antenna connectors, and one RJ45 port - Powered by PoE LAN (13W maximum) Retail
HP 2701A00J - 2.5dBi (2.4GHz) and 4.0dBi (5.0GHz) indoor dual band omni-directional 3-element antenna - For use in 2.4GHz and 5.0GHz 802.11a/b/g/n Multiple-Input Multiple-Output (MIMO) applications - Mounts to the ceiling Retail
HP 5092-0933 - Reverse Polarity SubMiniature version A (RP-SMA) 50ohm terminator - Used with non-diversity (two cable) antenna systems to terminate the unused antenna connector on the access point or radio port Retail
HP JL010-61001 - MSM460 dual radio 802.11a/n + 802.11b/g/n - Indoor plenum-rated access point, 450 Mbps per radio Retail
HP JL009-61001 - MSM430 dual radio 802.11a/n + 802.11b/g/n - Indoor plenum-rated access point, 300 Mbps per radio Retail
HP J9717-61001 - MSM466-R dual radio 802.11n access point (Japan) - 802.11n/a on radio one and 802.11n/a/b/g on radio two - Outdoor design with six type N connectors and one RJ45 port - Powered by PoE LAN connection (12.9 watts typical, 25 watts max Retail
HP J9715-61001 - MSM466-R dual radio 802.11n access point (Americas) - 802.11n/a on radio one and 802.11n/a/b/g on radio two - Outdoor design with six type N connectors and one RJ45 port - Powered by PoE LAN connection (12.9 watts typical, 25 watts m Retail
HP J9656-61101 - MSM466 dual radio 802.11n Access Point (Trade Agreements Act) - 802.11n/a radio one and 802.11n/a/b/g radio two (supporting three spatial streams and 3x3 MIMO) - Indoor design with six RP-SMA connectors and one RJ45 port - Powered by Retail
HP J9656-61001 - MSM466 dual radio 802.11n Access Point (Trade Agreements Act) - 802.11n/a radio one and 802.11n/a/b/g radio two (supporting three spatial streams and 3x3 MIMO) - Indoor design with six RP-SMA connectors and one RJ45 port - Powered by Retail
HP J9622-61101 - MSM466 dual radio 802.11n Access Point (Worldwide) - 802.11n/a radio one and 802.11n/a/b/g radio two (supporting three spatial streams and 3x3 MIMO) - Indoor design with six RP-SMA connectors and one RJ45 port - Powered by PoE LAN (1 Retail
